Kyocera 3035 manual Changing the management code, Change Mgmt code with #, Management code change

Section 7 COPIER MANAGEMENT FUNCTIONS

●Changing the management code

Perform the following procedure to change the management code used by the copy manager.

3Use the keypad to enter a new 4-digit management code. Inch specifications

IMPORTANT!

If you change the management code from its factory default, be sure to keep some sort of record of the new management code. If, for any reason, you forget the registered management code, you will need to contact your service representative.

	Display the “Machine default” screen.
1
	(See “(2) Accessing the machine default settings” on
	page 7-41.)
	Inch specifications

Management code change

Able to change management code. (# key)

Default setting - Machine default

Metric specifications

Change MGMT code with #

Able to change management code. (# key)

BackClose

BackClose

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Management code change” [“Change MGMT code with #”] in the settings list on the left side of the touch panel

and then touch the “Change #” key.

The “Management code change” [“Change MGMT code with #”] screen will be displayed.

Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Key sound ON/OFF	On
Silent mode	On	Down
Date/Time	2001/10/30 14:02
Time difference	GMT+08:00
Management code change	5000	Change #

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Key sound ON/OFF	On
Silent mode	On	Down
Date/Time	2001/10/30 14:02
Time difference	GMT+08:00
Management code change	5000	Change #

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-56