Kyocera 3035 manual Auto low power time, Minutes. Inch specifications, Low power mode chng. time

Section 7 COPIER MANAGEMENT FUNCTIONS

●Auto low power time

Perform the following procedure to set the amount of time that will elapse before the auto low power function automatically engages and puts the copier in the Low power mode if no operation has been performed on the copier during that time.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Low power mode chng. time” in the settings list on the left side of the touch panel and then touch the “Change #”

key.

The “Auto preheat time” screen will be displayed. Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Sleep mode changing time	60 Minute
Low power mode chng. time	15 Minute	Down
Select Copy output mode	Inner tray
Select FAX output mode	Inner tray
Select the main mode	Copy mode	Change #
Default setting

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Sleep mode changing time	60 Minute
Low power mode chng. time	15 Minute	Down
Select COPY output mode	Inner tray
Select FAX output mode	Inner tray
Select main mode	COPY Mode	Change #
Default setting

3Touch the “+” key or the “–” key to change the displayed time to that desired (any available setting between 1 minute and

240 minutes). Inch specifications

Low power mode chng. time Back Close

Set Changing time to turn autom. into low power mode after last setting,or when copying is done.

Minute

+

–

Default setting - Machine default

Metric specifications

Low power mode chng. time Back Close

Set Changing time to turn autom. into low power mode after last setting,or when copying is done.

Minute

Default setting - Machine default

NOTES

•The setting can be made to 1 minute, 5 minutes, 15 minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes or 240 minutes.

•If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-48