Kyocera 3035 manual Sort/Finished mode ON/OFF

Section 7 COPIER MANAGEMENT FUNCTIONS

●Sort/Finished mode ON/OFF

Perform the following procedure to determine whether or not the Sort and/or the Finished modes will be the default setting in the initial mode.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Sort” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Sort” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode
		Up
Sort	Sort : On / Offset : Off
Auto Rotation	Rotate	Down
Default margin width	Left 1/4" 0"
Default erase width	Border 1/4"	Center 1/2"
Preset limit	999 Set	Change #

Default setting

Metric specifications

Default setting / Counter

Copy default			Close
Default menu	Setting mode		Up
Sort	Sort : On / Group : Off
Auto Rotation	Rotate		Down
Default margin width	Left 6mm	0mm
Default erase width	Border 6mm Center 12mm
Preset limit	999 Set		Change #

Default setting

3Touch the “Sort:On” key under “Sort” if you want to make the Sort mode the default setting in the initial mode.

Inch specifications

Sort Back Close

Select default mode for sort, ON or OFF.

SortOffset

Sort : OffOff

Sort : OnOn

Default setting - Copy default

Metric specifications

Sort Back Close

Select default mode of sort, ON or OFF.

SortGroup

Sort : OffOff

Sort : On 1 set

Default setting - Copy default

4Touch the “On” [“1 set”] key under “Offset” [“Group”] if you want to make the Finished mode the default setting in the

initial mode.

•In metric specification copiers, if you select “Sort:Off” under “Sort”, the “1 set” key that appears under “Group” will change to the “Output each page” key.

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key. The touch panel will return to the screen in step 2.

6Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

7Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-78