Kyocera 3035 manual Default drawercassette, Default cassette, 1st paper

Section 7 COPIER MANAGEMENT FUNCTIONS

●Default drawer[cassette]

Perform the following procedure to set one drawer[cassette] that will be selected automatically regardless of the size of paper loaded in that drawer[cassette].

*It is NOT possible to select the multi-bypass tray as the default drawer[cassette].

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Default drawer[cassette]” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Default drawer[cassette]” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Select paper	APS
Select paper type(APS)	Plain	Down
Default drawer	1st paper
Drawer for cover paper	Bypass
Default magnification	Manual	Change #
Default setting

Metric specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Select paper	APS
Select paper type(APS)	Plain	Down
Default cassette	1st paper
Cassette for cover paper	Bypass
Default mode	Manual	Change #
Default setting

3Touch the key that corresponds to the desired drawer[cassette].

Inch specifications

Default drawer Back Close

Select priority drawer.

1st paper

2nd paper

3rd paper

4th paper

Default setting - Copy default

Metric specifications

Default cassette Back Close

Select paper cassette for default setting.

1st paper

2nd paper

3rd paper

4th paper

Default setting - Copy default

NOTES

•If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

•The setting for drawer[cassette] No.3 and No.4 will only be available when the optional Paper Feeder is installed on your copier.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-70