Kyocera 3035 manual Multi-bypass tray settings display ON/OFF, Check bypass sizing

Section 7 COPIER MANAGEMENT FUNCTIONS

●Multi-bypass tray settings display ON/OFF

Perform the following procedure to have the “Bypass setting” screen appear whenever the “Bypass” key is pressed in the “Basic” tab.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Check bypass sizing” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Check bypass sizing” screen will be displayed. Inch specifications

Default setting / Counter

Machine default			Close
Default menu		Setting mode	Up
Paper type (1st drawer)	Plain
Paper type (2nd drawer)	Plain		Down
Paper type (3rd drawer)	Plain
Paper type (4th drawer)	Plain
Check bypass sizing	Off		Change #
Default setting

Metric specifications

Default setting / Counter

Machine default			Close
Default menu		Setting mode	Up
Paper type (1st cassette)	Plain
Paper type (2nd cassette)	Plain		Down
Paper type (3rd cassette)	Plain
Paper type (4th cassette)	Plain
Check bypass sizing	Off		Change #
Default setting

3Touch the “On” key if you want to have the “Bypass setting” screen appear.

Inch specifications

Check bypass sizing Back Close

Display and check bypass setting mode when selecting.

Select "On" when using custom size or changing paper type.

On

Off

Default setting - Machine default

Metric specifications

Check bypass sizing Back Close

Display and check bypass setting mode when selecting.

Select "On" when using custom size or changing paper type.

On

Off

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting” screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-45