Original set direction, 11 x 81/2

23. Original set direction

During the procedures to use the 2-sided copy modes, the page	4	Touch the “Rear” [“Back Edge”] key or the “Left top corner”
separation/split copy modes, the margin mode, the centering/image	4	key, as appropriate.
		key, as appropriate.
shift mode, the memo mode, the border erase modes, the combine/		Inch specifications
merge copy modes, the print page numbers mode, the booklet/		Inch specifications
merge copy modes, the print page numbers mode, the booklet/
stitching mode, the auto selection/filing mode (optional), the staple
		Ready to copy.			Paper Size	Set
		Ready to copy.			11 x 81/2"
mode (optional) and the punch mode (optional), it is necessary to			Register
		Orig. set direction		Back		Close
specify the direction in which the originals were set. You can also use		Orig. set direction		Back		Close
				Check direction
the following procedure to perform that setting as well.				Check direction of
the following procedure to perform that setting as well.				original top side.
		"Check direction original" can be shown
		at right side of display.
NOTE		Follow the steps. If setting mode is
NOTE		wrong, incorrect copy will result.				Left top

Rearcorner

You can also specify the direction of the original that will be used as

the default setting in the initial mode. (See “Original set direction” onMetric specifications page 7-46-2.)

Touch the “Function” tab. The content of the “Function” tab will be displayed.

Orig. set direction

"Check direction original" can be shown at right side of display.

Follow the steps. If setting mode is wrong, incorrect copy will result .

Set

BackClose

Check direction Check direction of original .

Touch the “▼ Down” key. The content of the next portion of the “Function” tab will be displayed.

Touch the “Orig.set direction” key. The “Orig.set direction” screen will be displayed.

Inch specifications

Back Edge

Left top corner

Basic User choice FunctionProgram

5-49