Kyocera 3035 manual Making copies when copy management is turned, Enter ID-code

Section 7 COPIER MANAGEMENT FUNCTIONS

(7)Making copies when copy management is turned

ON

When copy management is turned ON, copying will only be possible when a valid department ID-code is entered.

IMPORTANT!

Once you are finished copying, BE SURE to press the [Management] key so that the “Enter ID-code” screen is displayed again.

1Use the numeric keys on the keypad to enter your department ID-code, and then touch the “Enter” key.

The “Basic” screen will be displayed.

Inch specifications

Enter ID-code.

Each Mgt.

Total

****

Clear

Enter

Metric specifications

Enter ID-code.

Each Mgt.

Total

****

Clear

Enter

NOTES

•If you enter the wrong ID-code, touch the “clear” key and reenter the correct ID-code.

•If an invalid (unregistered) department ID-code is entered, an error alarm will sound. Enter the correct ID-code.

•If you enter your department ID-code and touch the “Each Mgt. Total” key, you can check the copy counts for your own department.

Inch specifications

Each Management Total						Close
Number print.			Printer	Total	Number in( )
	Copy
Black & White:		50	30	80	is limit value
Scan.Transm.	Scanner		Fax Transm.	Fax
Scan # pages:		100	Trsm. # pages:	100
			Commun.Time:	1Hrs 10Mins
Default setting - Management				1st Sales Dept.
Metric specifications
Each Management Total						Close
Number print.			Printer	Total	Number in( )
	Copy
Black & White:		50	30	80	is limit value
Scan.Transm.	Scanner		Fax transm.	Fax
Scan # pages:		100	Trsm. # pages:	100
			Commun.Time:	1Hrs 10Mins
Default setting - Management				1st Sales Dept.

2Perform the desired copy operation as usual.

3Once you are finished copying, press the [Management] key.

7-37