Kyocera 3035 manual Acceptable envelope types Size, Setting envelopes, Copier

Section 3 PREPARATIONS

●Setting envelopes

Up to 20 envelopes can be set on the multi-bypass tray at a time. Refer to the following table for the types and sizes of envelopes that can be used in this machine.

Acceptable envelope types		Size
Monarch	3	1/8" x 7 1/2"
Comm. #10	3	3/8" x 9 1/2"
Envelope DL	110 x 220 (mm)
Envelope C5	162 x 229 (mm)
Executive	7	1/4" x 10 1/2"
Comm. #9	3	7/8" x 8 7/8"
Comm. #6-3/4	3	5/8" x 6 1/2"
ISO B5	176 x 250 (mm)
Envelope C4	229 x 324 (mm)
Oufuku Hagaki	200 x 148 (mm)
YOUKEI 2	162 x 114 (mm)
YOUKEI 4	234 x 105 (mm)

1Open the multi-bypass tray.

2Align the insert guides with the envelope size.

3When using envelopes that are wider than they are tall, leave the flap closed and set the envelopes with the copy side

facing upward and the flap facing towards the rear of the copier. Then slide the envelopes into the slot along the insert guides as far as they will go.

When using envelopes that are taller than they are wide, open the flap and set the envelopes with the copy side facing upward and the flap facing away from the direction of insertion. Then slide the envelopes into the slot along the insert guides as far as they will go.

Copier

Copier

NOTES

•If the optional Printer Kit or Printer/scanner Kit is installed on your copier and you attempt to print from a computer onto envelopes that are wider than they are tall, be sure to leave the flap closed and set the envelopes with the side to be printed onto facing upward. Orient the edge with the flap towards the front of the copier and then slide the envelopes into the slot along the insert guides as far as they will go.

Copier

•The proper orientation will actually depend upon the type of envelope being used.

•Incorrectly loading envelopes can result in printing in the wrong orientation or on the wrong side.

•When setting envelopes on the multi-bypass tray, BE SURE to specify the type of envelopes that will be used under “3. Multi- bypass tray paper settings” on page 7-87.

3-4