Kyocera 3035 Original set direction, Paper type 4th drawer Plain, Paper type 4th cassette Plain

Section 7 COPIER MANAGEMENT FUNCTIONS

●Original set direction

Perform the following procedure to designate the default setting for the original set direction.

1Display the “Machine default” screen.

(See “(2) Accessing the machine default settings” on page 7-41.)

Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Orig. set direction” in the settings list on the left side of the touch panel and then touch the “Change #” key.

The “Orig. set direction” screen will be displayed. Inch specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Paper type (4th drawer)	Plain
Check bypass sizing	Off	Down
Select paper type (2sided)
Special paper action mode	Speed priority
Orig. set direction	Rear	Change #
Default setting

Metric specifications

Default setting / Counter

Machine default		Close
Default menu	Setting mode	Up
Paper type (4th cassette)	Plain
Check bypass sizing	Off	Down
Select paper type (2sided)
Specif. paper action mode	Speed priority
Orig. set direction	Back Edge	Change #
Default setting

3Select either “Rear” [“Back Edge”] or “Left top corner”. Inch specifications

Orig. set direction Back Close

Select default mode for Original set direction.

Rear or Left top corner.

Rear

Left top corner

Default setting - Machine default

Metric specifications

Orig. set direction Back Close

Select default mode for Original set direction.

Back Edge or Left top corner.

Back Edge

Left top corner

Default setting - Machine default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting” screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-46-2