Kyocera 3035 manual Default setting Description Available Factory, Reference, Paper type

Section 7 COPIER MANAGEMENT FUNCTIONS

Default setting		Description			Available	Factory	Reference
					settings	setting	page
Paper type	Sets and then displays the type of paper that is loaded in				Plain	Plain	7-44
(drawer[cassette] No.1 -	drawers[cassettes] No.1 through No.4.				Preprinted
No. 4)	* The setting for drawer[cassette] No.3 and No.4 will only				Recycled
	be available when the optional Paper Feeder is				Letterhead
	installed on your copier.				Color [Colour]
					Prepunched
					Rough
					Bond
					High quality
					Vellum
					Custom 1 –
					Custom 8
Multi-bypass tray	Turn this setting ON if you want the “Bypass setting”				On / Off	Off	7-45
settings display ON/OFF	screen to be displayed whenever the “Bypass” key is
	touched in the “Basic” tab.
Custom paper type for	Sets whether or not each custom paper type (custom 1 –				On / Off	On	7-46
2-sided copying	custom 8) will be available for use in
	2-sided copying.
	-
Special paper action	When copying onto prepunched, preprinted or letterhead				Adj. print Direction /	Speed Priority	7-46-1
setting	paper, and performing both 1-sided copying and 2-sided				Speed Priority
	copying from the same drawer[cassette], the positioning
	of the holes in relation to the copied image may be
	different for each copy or the front and rear images of 2-
	sided copies may be copied onto the opposites sides of
	the paper. If you select “Adj. print Direction”, both 1-sided
	and 2-sided copies will be created with the same
	orientation.
	Example: Set the paper as shown in the illustration
			Drawer[Cassette]
	Setting	1-sided copying		2-sided copying
	Adj. print
	Direction
	Speed
	Priority

*When “Adj. print Direction” is selected, the speed of 1- sided copying will be somewhat slower than normal.

*When making copies with “Adj. print Direction” selected, set the paper as shown in illustration A and with the first image being copied set face-down. (If the optional Built-in Finisher is installed on your copier, set the paper as shown in illustration B and with the first image being copied set face-down.)

*If the optional Document Finisher or Built-in Finisher is installed on your copier and you have selected either the Staple mode or the Hole Punch mode, the direction that the copy image is created in may not conform to the desired position of the staples or holes.

7-39