Kyocera 3035 manual Customize screen layout Add functions, CustomizeAdd function, Margin None

Section 7 COPIER MANAGEMENT FUNCTIONS

●Customize screen layout (Add functions)

Perform the following procedure to add often-used functions and/or modes, or to change the order of their layout, in order to make the display more appropriate to the way you use the copier.

1Display the “Copy default” screen.

(See “(5) Accessing the copy default settings” on page 7-62.) Inch specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	BOX	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

Metric specifications

Default setting / Counter

Default setting				End
Copy		Language	Management
default
		Bypass	Hard Disk	Counter
		setting	Management	check
Machine	Document	Register	Print	User
default	Management	orig. size	report	Adjustment

2Select “Customize(Add function)” in the settings list on the left side of the touch panel and then touch the “Change #”

key.

The “Customize(Add function)” screen will be displayed. Inch specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify Copy	On / Default Off	Down
Display register key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

Metric specifications

Default setting / Counter

Copy default		Close
Default menu	Setting mode	Up
Preset limit	999 Set
Modify copy	On / Default Off	Down
Display"Register"key	On
Customize(Main function)
Customize(Add function)		Change #
Default setting

3If you want to add functions and/or modes to the “User choice” tab, touch the “▲” or the “▼” cursor key under the list

on the right to select the item you want to add. Then touch the “▲” or the “▼” cursor key under the list on the left to select in what order you want it to be added in that tab. Finally, touch the “b” key to add the selected item to the “User choice” tab.

Inch specifications

Customize(Add function)		Back	Close
Basic	Register mode		Addition mode
	Margin		None
	Border Erase		Select paper
	Combine		Combine
User choice	None		Auto Selection
	None		Batch scanning
	None		Margin
Default setting - Copy default
Metric specifications
Customize(Add function)		Back	Close
Basic			Addition Mode
	Register mode
	Margin		None
	Erace		Select paper
	Merge		Merge
User choice	None		Auto selection
	None		Batch scanning
	None		Margin
Default setting - Copy default

NOTE

If you want to quit the displayed setting without changing it, touch the “Back” key. The touch panel will return to the screen in step 2.

4Touch the “Close” key. The touch panel will return to the screen in step 2.

5Touch the “Close” key once again. The touch panel will return to the “Default setting”screen.

6Touch the “End” key. The touch panel will return to the contents of the “Basic” tab.

7-86