Kyocera 3035 manual Using the job build mode, Ready to Job build

Section 5 OTHER CONVENIENT FUNCTIONS

26. Easily add covers and insert sheets between various sets of originals in

one operation [Job build mode]

The job build function enables you to scan different sets of originals into memory in separate steps and then copy them all at one time. Each set of scanned originals is then seen as one step in the copy process and you can select different copy modes for each step (enlarge/reduce, border erase, original type [2-sided originals, 1-sided originals or open-faced book originals]). You can choose to have a blank sheet of paper fed in between each set of originals, as well as have front and rear covers included for the full set, AND do this all during 2-sided copying!

A-1				3	C-2
			1	B-3
		2	B-1
		A-3
B-1 C-1	2	A-1

(1) Using the job build mode

The following procedure shows one way of using the job build mode and explains how to perform that operation under the situation indicated in the examples below.

[Example] <Finished copies>

(The asterisk “*” in the illustration indicates the blank sheets.)

2	2-1
-
2

1	1-1	2
-
2
A-1
1

<Originals>

NOTE

This procedure will assume that the color paper to be used as the front cover and the middle insert (originals “A” and “C”), as well as for the back cover, will be set on the multi-bypass, and that there is plain copy paper loaded in drawer[cassette] No.1.

●Step 1: Accessing the “Job build” screen

1 Press the [Job build] key.

The “Job build” screen will be displayed.

●Making the settings that apply to all steps

First, the settings for the 2-sided copy modes and the repeat copy mode must be made.

NOTES

•The repeat copy mode is used to enable you to make an additional number of copy sets later.

•It is also possible to select other settings and functions, as desired, besides those given in the example procedure. (See “(2) Selecting the settings and functions” on page 5-62.)

2Touch the “1 sided/2 sided” key.

The “1 sided/2 sided” screen will be displayed. Inch specifications

	Ready to Job build.					Set
	Place originals then press Start key.
Job Build - Step1						End
		11x81/2”	1 sided	1 sided copy		Insert
Select			Original	1 sided/		page
paper			type	2 sided	1 sided copy-Left
	Offset		AMS	Back Edge
					Finished page #:0
Finished			Reduce	Orig. set
			/Enlarge	direction
		Basic	Quality	Edit

A B			C D
1	1-2	2	2-2
	1-1		2-1

Metric specifications

Ready to Job build.

Set original. Press Start key.

Job Build-Step 1

	1-sided	1-sided Copy
Select	Original	1-sided/
paper	type	2-sided
Group	AMS	Back Edge
Finished	Reduce/	Orig. set
	Enlarge	direction

Set

End

Insert blank page

1-sided Copy-Left Finished page #: 0

Basic Quality Edit

5-57