Kyocera 3035 manual Key or the Punch mode key, as appropriate

Section 5 OTHER CONVENIENT FUNCTIONS

2Select how you want the copy sets to be finished by touching the “Staple mode” key, the “Saddle Stitch” [“Center Staple” ]

key or the “Punch mode” key, as appropriate.

Follow the instructions on the right side of the touch panel and verify the direction in which the originals were set.

Inch specifications

Ready to Job build.					Set
Place originals then press Start key.
Finished				Back	Close
	Offset	Staple	Punch	Check direction
		No cover	No cover	Check direction of
				original top side.
	Off	Staple	Punch
		mode	mode
	On	None
		Saddle
					Left top
		Stitch		Rear
					corner

2Select the desired magnification ratio.

If you want to have the copy magnification ratio selected automatically, touch the “AMS” key.

If you want to manually set the magnification ratio, touch the “# keys” [“#-Keys”] key and then enter the desired ratio with the keypad, or touch the “+” key or the “-” key to change the displayed magnification ratio to the desired setting in 1% increments.

You can also select the magnification ratio by touching the preset zoom ratio keys at the right that corresponds to the desired ratio.

Inch specifications

Ready to Job build.		Set
Place originals then press Start key.
Reduce/Enlarge	Back	Close

Metric specifications

Ready to Job build.

Set original. Press Start key.

Finished
Group	Group	Staple

		Set
	Back	Close
Punch	Check direction

Check direction of original.

(25	400)
						154 %	77 %
		100	%		AMS
						51/2x81/2"R81/2x14"	11x17" R81/2x14"
Standard						129 %	64 %
				100 %
Zoom						81/2x11" R11x17"	11x17" R81/2x11"
						121 %	50 %
XY Zoom					400 %
						81/2x14" R81/2x17"	11x17" R51/2x81/2"
						78 %	25 %
# keys					200 %
					51/2x81/2"R11x17"	81/2x14" R81/2x11"

None	Off	Staple
		Mode
1 set	1 set	None
		Center
		Staple

Punch

Mode

Back Edge	Left top
	corner

Metric specifications

Ready to Job build.

Set original. Press Start key.

Reduce/Enlarge

(25~400)

	Set
Back	Close

IMPORTANT!

If the designation for the direction that the originals are set is not correct, copying may be accomplished incorrectly.

100 %

Standard

Zoom

XY Zoom

#-Keys

	AMS		141%		A 4➔A3	75%
					A 5➔A4		11x	15"➔A 4
100%			127%		Folio➔A3	70%		A3➔A4
								A4➔A5
			50%
400%		106%		11x15"➔A3
200%			90%
		A 5➔A 3			Folio➔A4	25%

3Touch the “Close” key. The touch panel will return to the screen in step 1.

5Making copies at an enlarged or reduced magnification ratio This procedure selects the magnification ratio of the finished copies.

1 With the content of the “Basic” tab displayed, touch the “Reduce/Enlarge” key. The “Reduce/Enlarge” screen will be

displayed.

Inch specifications

	Ready to Job build.					Set
	Place originals then press Start key.
Job Build - Step1						End
		11x81/2”	1 sided	1 sided copy		Insert
Select			Original	1 sided/		page
paper			type	2 sided	1 sided copy-Left
	Offset		AMS	Back Edge
					Finished page #:0
Finished			Reduce	Orig. set
			/Enlarge	direction
		Basic	Quality	Edit

Metric specifications (Asia Pacific)

Ready to Job build.									Set
Set original. Press Start key.
Reduce/Enlarge						Back		Close
(25~400)
	100	%	AMS		141%	A 4➔A 3	81%		B 4➔A 4
						B 5➔B 4			B 5➔A 5
Standard			100%		122%	A 4➔B 4	70%		A 3➔A 4
Zoom						A 5➔B 5			B 4➔B 5
XY Zoom			400%		115%	B 4➔A 3	50%
						B 5➔A 4
	#-Keys		200%		86%	A 3➔B 4	25%
				A 5➔A 3		A 4➔B 5

3Touch the “Close” key. The touch panel will return to the screen in step 1.

Metric specifications

Ready to Job build.

Set original. Press Start key.

Job Build-Step 1

	1-sided	1-sided Copy
Select	Original	1-sided/
paper	type	2-sided
Group	AMS	Back Edge
Finished	Reduce/	Orig. set
	Enlarge	direction

Set

End

Insert blank page

1-sided Copy-Left Finished page #: 0

Basic Quality Edit

5-64