Before you start!
Introduction
The AVR250 is a high quality and high performance home cinema processor and
In addition to the
As well as providing the audio and video being used in the main listening area, the AVR250 allows the same, or a different, source to be routed to a second area (called ‘Zone 2’), such as the kitchen, bedroom, lounge, etc. Zone 2 can have full remote control over the source selection and volume in that area.
The customised installation of the AVR250 in a listening room is an important process which requires care at every stage. For this reason, the installation information is very comprehensive and should be followed carefully.
Using this handbook
Thank you for purchasing the Arcam AVR250 Surround Sound Receiver.
This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam AVR250 Surround Sound Receiver. The remote control handset supplied with the equipment is also described.
It may be that the AVR250 has been installed and set up as part of your
Safety
Safety guidelines are set out on page 2 of this handbook.
Many of these items are common sense precautions but, for your own safety, and to ensure that you do not damage the unit, we recommend that you read them.
This is a class 1 product and requires an earth connection.
What’s in the box?
Please confirm that the following items are in the box when you receive it:
n Arcam AVR250
n Arcam
n FM ribbon and AM loop antennae;
n Mains power lead appropriate for the mains supply in your area; n Product registration card and envelope.
If any of these items are missing or incorrect, please contact your Arcam dealer immediately.
AVR250