1.While in Finish Mode, press and hold the SET button until the word SET briefly appears on the display, followed by a flashing value.
2.Set the first value by pressing + (DISPLAY) or Ð (STOP/RESET).
3.Press SELECT (SET/FORMAT) to move to the next value to set.
4.Repeat steps 2 and 3 for all the values that need adjustment.
5.Press DONE (MODE) to save your changes and complete the setting process.
For Finish Mode, you can set the following values:
➤
➤Unit (NM, KM, or MI)
➤Target time
➤Alert option (an audible alert will cause the Watch to both beep and flash the predicted finish time and a silent alert will only flash the predicted finish time)
Operating Finish Mode
1.Press MODE until Finish Mode appears.
2.Press START/SPLIT to begin timing.
3.Press START/SPLIT again to take a split and automatically begin timing a new lap.
4.Press STOP/RESET to stop timing when you reach the end of your activity.
5.Press START/SPLIT to continue timing.
OR
7. Press and hold STOP/RESET again to reset the display to zero.
Viewing performance data in Finish Mode
When using either the HR Sensor and/or the
➤Finish Time: The predicted finish time based on your current speed and distance. The finish time will flash if your current pace will not allow you to finish within your selected target time. If you stop moving, the Watch display replaces the finish time with the word STOPPED.
➤Heart Rate: Current heart rate
➤Pace: Current velocity, expressed in minutes per selected distance unit, such as miles or kilometers
➤Average Pace: Average
➤Speed: Current velocity
➤Average Speed: Average velocity for the period that you run the chronograph
➤Distance: Distance traveled while you run the chronograph
58 | 59 |
