For Timer Mode, you can set the following values:
➤Time (hours, minutes, seconds for up to 99 hours, 59 minutes, and 59 seconds)
➤End action (STOP, REPEAT, or CHRONO)
Operating the timer
1.Press START/SPLIT to start the timer countdown.
2.Pause the countdown by pressing STOP/RESET. You may resume the countdown by pressing START/SPLIT again, OR reset the timer by pressing and holding STOP/RESET.
3.When the timer reaches zero, a brief alert sounds.
4.The timer will stop after the alert if set to STOP.
OR
the timer will begin another countdown if set to REPEAT and continue until you press STOP/RESET.
The lower line of the display will show RPT and a number (for example, RPT 2). RPT indicates the timer is repeating
and the number indicates how many times the timer has cycled through the repeat countdown. You will also see the repeat icon, indicating the timer is set to repeat.
OR
The timer will switch to Chronograph Mode if set to that mode. You will see the switch mode icon, indicating the timer will switch modes at the end of the countdown.
32
Timer Mode tips & tricks
➤You can press MODE within Timer Mode to switch the display to another mode without disrupting the operation of the
timer. The timer icon will appear indicating timer operation.
➤The timer will only switch to the Chronograph Mode if you reset the chronograph to zero and Sync Timer & Chrono is turned off (see
Basic Timer Mode example
As part of your overall health plan, you decide to take a
Alarm Mode
You can use your Watch as an alarm clock for up to five separate alarms. When you set an alarm, the alarm clock icon appears in Time of Day Mode. The alarm can alert you at the same time every day, or only weekdays, weekends, or even only one time (useful for appointment reminders).
33