Lap Data Mode
Lap Data Mode allows you to review stored lap information for time and heart rate information. To record lap data, you must run the chronograph.
INDIGLO¨ | ▲ |
| |
data value | |
To Summary | ▼ |
Mode or hold | data value |
for time |
|
When you use Lap Data Mode, each recalled lap will display three lines of data. The lower line will show the lap number labeled RCL (for recall) for each lap you stored in the chronograph.
Access this information using these steps.
1.Press MODE until the Lap Data Mode appears.
2.Press ▲ (DISPLAY) or ▼ (STOP/RESET) to navigate through data for each lap.
Viewing data in Lap Data Mode
As you press the buttons, you will review information for each lap. This information includes:
➤Lap and split time: Lap time includes data for each segment of your activity, and split time shows data for the overall activity.
26
➤Lap average heart rate and time in average heart rate:
Average heart rate displays the average heart rate for the lap, and time in average heart rate shows how much time during the lap you spent at the average heart rate.
Lap Data Mode tips & tricks
➤Once you restart the chronograph from zero for your next activity, you erase lap data from your previous activity.
➤If you want to view information for your entire activity refer to Summary Mode in the next section.
➤If you have activated SYNC TIMER & CHRONO (see page 40) then your lap data is equivalent to your performance for each interval.
Lap Data Mode example
You love to ride your bike, but you just finished a long ride and you are exhausted! In your exhaustion, you forget to look at the lap data for your ride and you reset the chronograph to zero. You think you have lost your data, but then you remember. You can still view lap data for your ride, as long as you do not restart the chronograph first.
27
