Panasonic SDR-H90PC Problem, Even if HDD or an SD card is formatted, it cannot be used

Problem

Even if HDD or an SD card is formatted, it cannot be used.

The indication disappears.

The screen is frozen.

No operation can be performed.

“ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed.

When the SD card is inserted in this unit, it is not recognized.

When the SD card is inserted in another device, it is not recognized.

Check points

≥Either this unit or the SD card may be damaged. Please contact consumer support (l 119, 120).

≥Use an SD card from 8 MB to 32 GB with this unit. (l 20)

≥No operation can be performed on this unit when it is connected to a PC.

≥Turn off the power to this unit. If the power cannot be turned off, remove the battery or AC adaptor and then reconnect it. Turn on the power again. If normal operation is still not restored, detach the power connected, and contact consumer support. (l 119, 120)

≥The unit has automatically detected an error. Restart the unit by turning off and on the power.

≥The power will be turned off in about 1 minute if the power is not turned off and on.

≥Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, and contact consumer support. (l 119, 120) Do not attempt to repair the unit by yourself.

≥Use this unit to format SD cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. (l 71)

≥Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. Refer to the operating instructions of the device for details.

104

LSQT1449