Installing the Thermal paper
1 Open the Control panel by pressing down the Control panel open button.
Control panel
Press down
2 Open the Inner cover by sliding down the Inner cover open lever.
Inner cover
lnner cover open lever
3 Put the Thermal paper to the Paper holder by spreading the Paper holder.
Paper holder
Left side
Right side
Thermal paper
Correct |
| Incorrect | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slack
If the thermal paper has a slack, tighten it by winding.
4 Put the Paper holder in the set position of the Main unit.
Left side
Set position
Right side
Paper holder
5 Insert the Thermal paper to the slit of Inner cover.
Slit
Thermal paper
6 Make sure that mark point on the Release gear is correct, and then close the Inner cover and pull out the Thermal paper (approx. 5cm) through the outlet for recording paper.
Mark on the lnner cover
Outlet
Mark on the release gear
Inner cover
7 Close the Control panel
Click
7
