ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Bottom Panel with Product Label

The product label on the bottom of the wireless VPN firewall’s enclosure displays factory defaults settings, regulatory compliance, and other information.

Figure 3.

Choose a Location for the Wireless VPN Firewall

The wireless VPN firewall is suitable for use in an office environment where it can be freestanding (on its runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can rack-mount the wireless VPN firewall in a wiring closet or equipment room.

Consider the following when deciding where to position the wireless VPN firewall:

The unit is accessible, and cables can be connected easily.

Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens, and air-conditioning units.

Water or moisture cannot enter the case of the unit.

Airflow around the unit and through the vents in the side of the case is not restricted. Provide a minimum of 25 mm or 1 inch clearance.

The air is as free of dust as possible.

Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air-conditioned environment. For information about the recommended operating temperatures for the wireless VPN firewall, see Appendix A, Default Settings and Technical Specifications.

Introduction

19

Page 19
Image 19
NETGEAR FVS318N manual Choose a Location for the Wireless VPN Firewall, Bottom Panel with Product Label