NETGEAR FVS318N manual 352, Setting Description Enable E-mail Logs, Send e-mail logs by Schedule

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 85. Firewall Logs & E-mail screen settings (continued)

Setting

Description

Enable E-mail Logs

Do you want	Select the Yes radio button to enable the wireless VPN firewall to email logs to a specified
logs to be	email address. Complete the fields that are shown on the right side of the screen.
emailed to	Select the No radio button to prevent the logs from being emailed, which is the default
you?	setting.
	E-Mail Server Address	The IP address or Internet name of your ISP’s outgoing email
		SMTP server.
		Note: If you leave this field blank, the wireless VPN firewall cannot
		send email logs and alerts.
	Return E-Mail Address	The email address of the sender for email identification purposes.
		For example, enter fvs_alerts@company.com.
	Send to E-Mail	The email address to which the logs are sent. Typically, this is the
	Address	email address of the administrator.
	Custom SMTP Port	Enter the port number of the SMTP server for the outgoing email.

Select one of the following radio buttons to specify SMTP server authentication for the outgoing email:

•No Authentication. The SMTP server does not require authentication.

•Login Plain. The SMTP server requires authentication with regular login. Specify the user name and password to be used for authentication.

•CRAM-MD5. The SMTP server requires authentication with CRAM-MD5 login. Specify the user name and password to be used for authentication.

	Username	The user name for SMTP server authentication.
	Password	The password for SMTP server authentication.
	Respond to Identd	To respond to Ident protocol messages, select the Respond to
	from SMTP Server	Identd from SMTP Server check box. The Ident protocol is a
		relatively weak scheme to verify the sender of an email. (A
		common daemon program for providing the Ident service is
		Identd.)
Send e-mail logs by Schedule
Unit	Enter a schedule for sending the logs. From the Unit drop-down list, select one of the
	following:
	• Never. No logs are sent.
	• Hourly. The logs are sent every hour.
	• Daily. The logs are sent daily. Specify the time.
	• Weekly. The logs are sent weekly. Specify the day and time.
Day	From the Day drop-down list, select the day on which the logs are sent.
Time	From the Time drop-down list select the hour on which the logs are sent, and then select
	either the a.m. or p.m. radio button.

Monitor System Access and Performance

352