NETGEAR FVS318N  To edit a service,  To delete one or more services, 174, Service Profiles on

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 37. Services screen settings (continued)

Setting	Description
Start Port	The first TCP or UDP port of a range that the service uses.
	Note: This field is enabled only when you select TCP or UDP from the Type drop-down list.
Finish Port	The last TCP or UDP port of a range that the service uses. If the service uses only a single
	port number, enter the same number in the Start Port and Finish Port fields.
	Note: This field is enabled only when you select TCP or UDP from the Type drop-down list.
Default QoS	From the Default QoS Priority drop-down list, select the QoS profile that you want to assign
Priority	to the service. For more information about QoS profiles, see Preconfigured Quality of
	Service Profiles on page 177.

3.Click Apply to save your settings. The new custom service is added to the Custom Services table.

To edit a service:

1.In the Custom Services table, click the Edit table button to the right of the service that you want to edit. The Edit Service screen displays:

Figure 93.

2.Modify the settings that you wish to change (see the previous table).

3.Click Apply to save your changes. The modified service is displayed in the Custom Services table.

To delete one or more services:

1.In the Custom Services table, select the check box to the left of each service that you want to delete, or click the Select All table button to select all services.

2.Click the Delete table button.

Firewall Protection

174