NETGEAR FVS318N manual  To edit an Snmp configuration, Snmp screen settings, 337

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

2.To specify a new SNMP configuration, in the Create New SNMP Configuration Entry section of the screen, enter the settings as explained in the following table:

Table 80. SNMP screen settings

Setting	Description
IP Address	Enter the IP address of the new SNMP manager.
Subnet Mask	Enter the subnet mask of the new SNMP manager.
	Note the following:
	• If you want to narrow down the number of devices that can access the wireless
	VPN firewall through the host IP address and receive traps, enter an IP address
	with a subnet mask of 255.255.255.252.
	• If you want to allow a subnet to access the wireless VPN firewall through the host
	IP address and receive traps, enter an IP address with a subnet mask of
	255.0.0.0. The traps are received at the IP address, but almost the entire subnet
	has access through the community string.
SNMP Version	From the drop-down list, select the SNMP version:
	• v1. SNMPv1.
	• v2c. SNMPv2c.
	• v3. SNMPv3.
Port	Enter the port number of the new SNMP manager. The default port number is 162.
Community	Enter the community string that allows the SNMP manager access to the MIB
	objects of the wireless VPN firewall for the purpose of reading only.

3.Click Add to add the new SNMP configuration to the SNMP Configuration table.

To edit an SNMP configuration:

1.On the SNMP screen (see the previous figure), click the Edit button in the Action column of the SNMP Configuration table for the SNMP configuration that you want to modify. The Edit SNMP screen displays:

Figure 201.

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

Network and System Management

337