NETGEAR FVS318N manual Pptp and PPPoE settings, Setting Description, Step

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 13.

5.If your connection is PPTP or PPPoE, your ISP requires an initial login. Enter the settings as explained in the following table:

Table 3. PPTP and PPPoE settings

Setting	Description
Austria (PPTP)	If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this
	radio button, and enter the following settings:
Note: For login	Account Name	The account name is also known as the host name or system name.
		Enter the valid account name for the PPTP connection (usually your
and password
		email ID assigned by your ISP). Some ISPs require you to enter
information, see
		your full email address here.
Step 2 and Step 3.
	Domain Name	Your domain name or workgroup name assigned by your ISP, or
		your ISP’s domain name. You can leave this field blank.
	Idle Timeout	Select the Keep Connected radio button to keep the connection
		always on. To log out after the connection is idle for a period, select
		the Idle Timeout radio button and, in the Idle Timeout field, enter the
		number of minutes to wait before disconnecting. This is useful if your
		ISP charges you based on the period that you have logged in.
	My IP Address	The IP address assigned by the ISP to make the connection with the
		ISP server.
	Server IP	The IP address of the PPTP server.
	Address

IPv4 and IPv6 Internet and Broadband Settings

32