LAN Configuration
89
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

3. Click Apply to save your settings.

DMZ Port for IPv6 Traffic

The DMZ Setup (IPv6) screen lets you set up the DMZ port for IPv6 traffic. You can enable or

disable the hardware DMZ port (LAN port 8; see Front Panel on page 15) for IPv6 traffic and

configure an IPv6 address and prefix length for the DMZ port.

The IPv6 clients in the DMZ can autoconfigure their own IPv6 address or obtain an IPv6

address through a DHCPv6 server.

DHCP Relay To use the wireless VPN firewall as a DHCP relay agent for a DHCP server
somewhere else in your network, select the DHCP Relay radio button. Enter the
following setting:
Relay Gateway The IP address of the DHCP server for which the wireless VPN
firewall serves as a relay.
Enable LDAP
information To enable the DHCP server to provide Lightweight Directory Access Protocol
(LDAP) server information, select the Enable LDAP information check box. Enter
the following settings.
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory tree
from which the LDAP search begins. You can specify multiple
search objects, separated by commas. The search objects
include:
• CN (for common name)
• OU (for organizational unit)
• O (for organization)
• C (for country)
• DC (for domain)
For example, to search the Netgear.net domain for all last
names of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
Port The port number for the LDAP server. The default setting is 0
(zero).
DNS Proxy
Enable DNS Proxy This setting is optional. To enable the wireless VPN firewall to provide a LAN IP
address for DNS address name resolution, select the Enable DNS Proxy check
box. This check box is selected by default.
Note: When the DNS Proxy option is disabled, all DHCP clients receive the DNS
IP addresses of the ISP but without the DNS proxy IP address.

Table 18. DMZ Setup screen settings for IPv4 (continued)

Setting Description