NETGEAR FVS318N manual Manage the Configuration File, 340, Setting Description SysName

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 82. SNMP SysConfiguration screen settings (continued)

Setting	Description
SysName	Enter the name of the wireless VPN firewall for SNMP identification purposes. The
	default name is FVS318N.

3.Click Apply to save your changes.

Manage the Configuration File

The configuration settings of the wireless VPN firewall are stored in a configuration file on the wireless VPN firewall. This file can be saved (backed up) to a computer, retrieved (restored) from the computer, cleared to factory default settings, or upgraded to a new version.

Once the wireless VPN firewall is installed and works correctly, make a backup of the configuration file to a computer. If necessary, you can later restore the wireless VPN firewall settings from this file.

The Backup & Restore Settings screen lets you:

•Back up and save a copy of the current settings (see Back Up Settings on page 341)

•Restore saved settings from the backed-up file (see Restore Settings on page 341)

•Revert to the factory default settings (see Revert to Factory Default Settings on page 342)

•Update the firmware (see Update the Firmware on page 343)

To display the Settings Backup and Firmware Upgrade screen, select Administration > Settings Backup & Upgrade.

Figure 204.

Network and System Management

340