NETGEAR FVS318N  To delete one or more Snmp configurations,  To edit the SNMPv3 default users

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To delete one or more SNMP configurations:

1.On the SNMP screen (see Figure 200 on page 336), select the check box to the left of each SNMP configuration that you want to delete, or click the Select All table button to select all SNMP configurations.

2.Click the Delete table button.

To edit the SNMPv3 default users:

1.On the SNMP screen (see Figure 200 on page 336), click the Edit button in the Action column of the SNMPv3 User table for the SNMPv3 default user that you want to modify. The Edit User screen displays:

Figure 202.

2.Configure the settings as explained in the following table:

Table 81. Edit User screen settings for SNMPv3 users

Setting	Description
Username	The default user name (admin or guest) for information only.
Access Type	The default access type (RWUSER or ROUSER) for information only.
Security Level	From the drop-down list, select the security level for communication between
	the SNMPv3 user and the SNMP agent that collects the MIB objects from the
	wireless VPN firewall:
	• NoAuthNoPriv. Both authentication and privacy are disabled. This is the
	default setting.
	• AuthNoPriv. Authentication is enabled but privacy is disabled. Make a
	selection from the Authentication Algorithm drop-down list and enter an
	authentication password.
	• AuthPriv. Authentication and privacy are enabled. Make a selection from the
	Authentication Algorithm drop-down list and enter an authentication
	password. In addition, make a selection from the Privacy Algorithm
	drop-down list and enter a privacy password.

Network and System Management

338