ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Log In to the Wireless VPN Firewall

Note: To connect the wireless VPN firewall physically to your network, connect the cables and restart your network according to the

instructions in the ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N Installation Guide. A PDF of this guide is on the

NETGEAR support website at

http://support.netgear.com/app/products/model/a_id/19435.

To configure the wireless VPN firewall, you need to use a web browser such as Microsoft Internet Explorer 7.0 or later, Mozilla Firefox 4.0 or later, or Apple Safari 3.0 or later with JavaScript, cookies, and SSL enabled. (Google Chrome is not supported at this time.)

Although these web browsers are qualified for use with the wireless VPN firewall’s web management interface, SSL VPN users should choose a browser that supports JavaScript, Java, cookies, SSL, and ActiveX to take advantage of the full suite of applications. Note that Java is required only for the SSL VPN portal, not for the web management interface.

To log in to the wireless VPN firewall:

1.Start any of the qualified web browsers.

2.In the address field, enter https://192.168.1.1. The NETGEAR Configuration Manager Login screen displays in the browser.

Note: The wireless VPN firewall factory default IP address is 192.168.1.1. If you change the IP address, you need to use the IP address that you assigned to the wireless VPN firewall to log in to the wireless VPN firewall.

Introduction

20

Page 20
Image 20
NETGEAR FVS318N manual Log In to the Wireless VPN Firewall,  To log in to the wireless VPN firewall