NETGEAR FVS318N manual 287, Setting Description

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 70. Add SSL VPN Policy screen settings (continued)

Setting	Description
Apply	IP Address	Permission	From the drop-down list, select Permit or Deny to specify
Policy to?	(continued)		whether the policy permits or denies access.
(continued)
	IP Network	Policy Name	A descriptive name of the SSL VPN policy for identification and
			management purposes.
		IP Address	The network IPv4 or IPv6 network address to which the SSL
			VPN policy is applied.
		IPv4 screen	Subnet	The IPv4 network subnet mask to which the SSL
		only	Mask	VPN policy is applied.
		IPv6 screen	IPv6 Prefix	The IPv6 prefix length that apples to the network
		only	Length	to which the SSL VPN policy is applied.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank to
			apply the policy to all traffic.
		Service	From the drop-down list, select the service to which the SSL
			VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the drop-down list, select Permit or Deny to specify
			whether the policy permits or denies access.
	All	Policy Name	A descriptive name of the SSL VPN policy for identification and
	Addresses		management purposes.
		Port Range /	A port (fill in the Begin field) or a range of ports (fill in the Begin
		Port Number	and End fields) to which the SSL VPN policy is applied. Ports
			can be 0 through 65535. The policy is applied to all TCP and
			UDP traffic that passes on those ports. Leave the fields blank to
			apply the policy to all traffic.
		Service	From the drop-down list, select the service to which the SSL
			VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the drop-down list, select Permit or Deny to specify
			whether the policy permits or denies access.

5.Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table on the Policies screen. The new policy goes into effect immediately.

Virtual Private Networking Using SSL Connections

287