NETGEAR FVS318N manual Rear Panel

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Rear Panel

The rear panel of the wireless VPN firewall includes the antennas, a cable lock receptacle, a console port, a Reset button, a DC power connection, and a power switch.

Antennas

(1)and (7)

(6)Power switch

(2) Security lock		(4) Factory default
receptacle			Reset button
			(5) DC power
	(3) Console port		receptacle

Figure 2.

Viewed from left to right, the rear panel contains the following components:

1.Dipole antenna.

2.Cable security lock receptacle.

3.Console port. Port for connecting to an optional console terminal. The port has a DB9 male connector. The default baud rate is 9600 K. The pinouts are (2) Tx, (3) Rx, (5) and (7) Gnd.

4.Factory default Reset button. Using a sharp object, press and hold this button for about

8 seconds until the front panel Test LED flashes to reset the wireless VPN firewall to factory default settings. All configuration settings are lost, and the default password is restored.

5.DC power plug receptacle. Power input is 12VDC, 1A. The power plug is localized to the country of sale.

6.Power On/Off switch.

7.Dipole antenna.

Introduction

18