ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Configure Mode Config Operation on the Wireless VPN Firewall

To configure Mode Config on the wireless VPN firewall, first create a Mode Config record, and then select the Mode Config record for an IKE policy.

To configure Mode Config on the wireless VPN firewall:

1. Select VPN > IPSec VPN > Mode Config. The Mode Config screen displays:

Figure 145.

As an example, the screen shows two Mode Config records with the names EMEA Sales and NA Sales:

For EMEA Sales, a first pool (172.16.100.1 through 172.16.100.99) and second pool (172.16.200.1 through 172.16.200.99) are shown.

For NA Sales, a first pool (172.25.100.50 through 172.25.100.99), a second pool (172.25.210.1 through 172.25.210.99), and a third pool (172.25.220.80 through 172.25.220.99) are shown.

2.Under the List of Mode Config Records table, click the Add table button. The Add Mode Config Record screen displays:

Virtual Private Networking Using IPSec and L2TP Connections

244

Page 244
Image 244
NETGEAR FVS318N manual  To configure Mode Config on the wireless VPN firewall, 244