NETGEAR FVS318N manual  To edit a port triggering rule, Port Triggering screen settings, 191

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 103.

2.In the Add Port Triggering Rule section, enter the settings as explained in the following table:

Table 41. Port Triggering screen settings

Setting	Description
Name	A descriptive name of the rule for identification and management purposes.
Enable	From the drop-down list, select Yes to enable the rule. (You can define a rule but not
	enable it.) The default setting is No.
Protocol	From the drop-down list, select the protocol to which the rule applies:
	• TCP. The rule applies to an application that uses the Transmission Control
	Protocol (TCP).
	• UDP. The rule applies to an application that uses the User Datagram Protocol
	(UDP).
Outgoing Ports	Start Port	The start port (1–65535) of the range for triggering.
	End Port	The end port (1–65535) of the range for triggering.
Incoming Ports	Start Port	The start port (1–65535) of the range for responding.
	End Port	The end port (1–65535) of the range for responding.

3.Click the Add table button. The new port triggering rule is added to the Port Triggering Rules table.

To edit a port triggering rule:

1.In the Port Triggering Rules table, click the Edit table button to the right of the port triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.

2.Modify the settings that you wish to change (see the previous table).

3.Click Apply to save your changes. The modified port triggering rule is displayed in the Port Triggering Rules table.

Firewall Protection

191