NETGEAR FVS318N Configure the Client IP Address Range,  To define the client IP address range

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

-A split tunnel sends only traffic that is destined for the local network based on the specified client routes. All other traffic is sent to the Internet. A split tunnel allows you to manage bandwidth by reserving the VPN tunnel for local traffic only.

•If you enable split-tunnel support and you assign an entirely different subnet to the VPN tunnel clients from the subnet that is used by the local network, you need to add a client route to ensure that a VPN tunnel client connects to the local network over the VPN tunnel.

Configure the Client IP Address Range

First determine the address range to be assigned to VPN tunnel clients, and then define the address range.

To define the client IP address range:

1.Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen displays the IPv4 settings (the following screen shows some examples).

2.Specify the IP version for which you want to configure the SSL VPN client:

•IPv4. In the upper right of the screen, the IPv4 radio button is already selected by default. Go to Step 3.

Figure 166. SSL VPN Client screen for IPv4

Virtual Private Networking Using SSL Connections

276