NETGEAR FVS318N manual Create an IPv6 Gateway-to-Gateway VPN Tunnel with the Wizard, 199

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 110.

b.Locate the policy in the table, and click the Connect table button. The IPSec VPN connection becomes active.

Note: When using FQDNs, if the Dynamic DNS service is slow to update its servers when your DHCP WAN address changes, the VPN tunnel will fail because the FQDNs do not resolve to your new address. If you have the option to configure the update interval, set it to an appropriately short time.

Create an IPv6 Gateway-to-Gateway VPN Tunnel with the Wizard

Figure 111.

To set up an IPv6 gateway-to-gateway VPN tunnel using the VPN Wizard:

1.Select VPN > IPSec VPN > VPN Wizard.

2.In the upper right of the screen, select the IPv6 radio button. The VPN Wizard screen displays the IPv6 settings. (The following screen contains some examples that do not relate to other examples in this manual.)

Virtual Private Networking Using IPSec and L2TP Connections

199