NETGEAR FVS318N manual IP/MAC Binding screen settings for IPv4, 186

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 99.

2.In the Email IP/MAC Violations section of the screen, specify if you want to enable email logs for IP/MAC binding violations. (You have to do this only once.) Select one of the following radio buttons:

•Yes. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen (see Configure Logging, Alerts, and Event Notifications on page 349).

•No. IP/MAC binding violations are not emailed.

3.Click Apply to save your changes.

4.In the IP/MAC Bindings sections of the screen, enter the settings as explained in the following table:

Table 39. IP/MAC Binding screen settings for IPv4

Setting	Description
Name	A descriptive name of the binding for identification and management purposes.
MAC Address	The MAC address of the computer or device that is bound to the IP address.
IP Address	The IPv4 address of the computer or device that is bound to the MAC address.
Log Dropped	To log the dropped packets, select Enable from the drop-down list. The default setting
Packets	is Disable.

5.Click the Add table button. The new IP/MAC rule is added to the IP/MAC Bindings table.

Firewall Protection

186