ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

c.Make sure that Internet Protocol Version 6 (TCP/IPv6) displays, as is shown in the previous figure.

Make sure that the computer has an IPv6 address. If the computer has a link-local address only, it cannot reach the wireless VPN firewall or the Internet. On a computer that runs a Windows-based operating system, do the following (note that the steps might differ on the various Windows operating systems):

a.Open the Network Connections screen or the Network and Sharing Center screen. For example, on the Windows taskbar, click Start, then select Control Panel, and then Network Connections.

b.Click or double-click Local Area Connection for the connection to the wireless VPN firewall.

c.Click or double-click View status of this connection. The Local Area Connection Status screen displays:

Figure 229.

d.Make sure that Internet access shows for the IPv6 connection. (The previous figure shows that there is no Internet access.)

e.Click Details. The Network Connection Details screen displays:

Troubleshooting

385

Page 385
Image 385
NETGEAR FVS318N manual 385