NETGEAR FVS318N manual 201, Setting Description About VPN Wizard

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 113.

3.Complete the settings as explained in the following table:

Table 43. IPSec VPN Wizard settings for an IPv6 gateway-to-gateway tunnel

Setting	Description
About VPN Wizard
This VPN tunnel will connect	Select the Gateway radio button. The local WAN port’s IP address or
to the following peers	Internet name displays in the End Point Information section of the screen.
Connection Name and Remote IP Type
What is the new Connection	Enter a descriptive name for the connection. This name is used to help you
Name?	to manage the VPN settings; the name is not supplied to the remote VPN
	endpoint.
What is the pre-shared key?	Enter a pre-shared key. The key needs to be entered both here and on the
	remote VPN gateway. This key needs to have a minimum length of
	8 characters and should not exceed 49 characters.
End Point Informationa
What is the Remote WAN’s IP	Enter the IPv6 address or Internet name (FQDN) of the WAN interface on
Address or Internet Name?	the remote VPN tunnel endpoint.
What is the Local WAN’s IP	When you select the Gateway radio button in the About VPN Wizard
Address or Internet Name?	section of the screen, the IPv6 address of the wireless VPN firewall’s active
	WAN interface is automatically entered.

Virtual Private Networking Using IPSec and L2TP Connections

201