NETGEAR FVS318N Create DMZ WAN Outbound Service Rules, IPv4 DMZ WAN Outbound Service Rules, 148

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

•Disable. Disables the rule or rules. The ! status icon changes from a green circle to a gray circle, indicating that the selected rule or rules are disabled.

•Delete. Deletes the selected rule or rules.

Create DMZ WAN Outbound Service Rules

You can change the default outbound policy or define rules that specify exceptions to the default outbound policy. By adding custom rules, you can block or allow access based on the service or application, source or destination IP addresses, and time of day. An outbound rule can block or allow traffic between the DMZ and any external WAN IP address according to the schedule created on the Schedule screen.

IPv4 DMZ WAN Outbound Service Rules

To create a new IPv4 DMZ WAN outbound rule:

1.In the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by default. The screen displays the IPv4 settings (see Figure 69 on page 146).

Click the Add table button under the Outbound Services table. The Add DMZ WAN Outbound Service screen for IPv4 displays:

Figure 71.

Firewall Protection

148