NETGEAR FVS318N manual 362, Wireless Configuration

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Table 88. Detailed Status screen information (continued)

Item	Description
NAT (IPv4 only)	The NAT state can be either Enabled or Disabled, depending on whether NAT is
	enabled (see Network Address Translation on page 27) or classical routing is enabled
	(see Classical Routing on page 27).
IPv4 Connection Type	The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on whether
	the WAN address is obtained dynamically through a DHCP server or assigned
	statically by you. For information about connection types, see Configure the IPv4
	Internet Connection and WAN Settings on page 26.
IPv6 Connection Type	The connection type can be Static IPv6, PPPoE, or Dynamic IP (DHCPv6), depending
	on whether the WAN address is obtained dynamically through a DHCP server or ISP,
	or assigned statically by you. For information about connection types, see Configure
	the IPv6 Internet Connection and WAN Settings on page 37.
IPv4 Connection State	The IPv4 connection state can be either Connected or Not Connected, depending on
	whether the WAN interface is connected to the Internet over an IPv4 address. For
	information about configuring the IPv4 address of the WAN port, see Configure the
	IPv4 Internet Connection and WAN Settings on page 26.
IPv6 Connection State	The IPv6 connection state can be either Connected or Not Connected, depending on
	whether the WAN interface is connected to the Internet over an IPv6 address. For
	information about configuring the IPv6 address of the WAN port, see Configure the
	IPv6 Internet Connection and WAN Settings on page 37.
Link State	The link state can be either LINK UP or LINK DOWN, depending on whether the WAN
	port is physically connected to a modem, dish, or router. For information about
	connecting a WAN port, see the ProSafe Wireless-N 8-Port Gigabit VPN Firewall
	FVS318N Installation Guide.
Gateway	The IP address of the gateway.	These IPv4 settings are either obtained
		dynamically from your ISP or specified
Primary DNS Server	The IP address of the primary DNS server.	by you on the Broadband ISP Settings
		(IPv4) screen (see Manually Configure
Secondary DNS Server	The IP address of the secondary DNS	an IPv4 Internet Connection on
	server.	page 31).
Gateway (IPv6)	The IP address of the gateway.	These IPv6 settings are either obtained
Primary DNS Server	The IP address of the primary DNS server.	dynamically from your ISP or specified
(IPv6)		by you on the Broadband ISP Settings
		(IPv6) screen (see Configure a Static
Secondary DNS Server	The IP address of the secondary DNS	IPv6 Internet Connection on page 41).
(IPv6)	server.
Wireless Configuration
Mode	The wireless mode of the radio.
Region	The region that is assigned to the radio.	For information about how to configure
Country	The country that is assigned to the radio.	the wireless radio, see Configure the
		Basic Radio Settings on page 108.
Channel	The active channel on the radio.
Operating Frequency	The operating frequency of the radio.

Monitor System Access and Performance

362