NETGEAR FVS318N manual  To edit an IPv6 LAN address pool, LAN IPv6 Config screen settings

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 39.

2.Enter the settings as explained in the following table:

Table 14. LAN IPv6 Config screen settings

Setting	Description
Start IPv6 Address	Enter the start IP address. This address specifies the first of the contiguous
	addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
	assigned an IP address between this address and the end IP address.
End IPv6 Address	Enter the end IP address. This address specifies the last of the contiguous
	addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
	assigned an IP address between the start IP address and this IP address.
Prefix Length	Enter the IPv6 prefix length, for example, 10 or 64.

3.Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6 Address Pools table on the LAN Setup screen for IPv6.

To edit an IPv6 LAN address pool:

1.On the LAN Setup screen for IPv6 (see Figure 38 on page 75), click the Edit button in the Action column for the address pool that you want to modify. The LAN IPv6 Config screen displays.

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more IPv6 LAN address pools:

1.On the LAN Setup screen for IPv6 (see Figure 38 on page 75), select the check box to the left of each address pool that you want to delete, or click the Select All table button to select all address pools.

2.Click the Delete table button.

LAN Configuration

78