NETGEAR FVS318N manual 141

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 65.

2.Enter the settings as explained in Table 33 on page 131. In addition to selections from the Service, Action, and Log drop-down lists, you need to make selections from the following drop-down lists:

•LAN Users

•WAN Users

Unless your selection from the Action drop-down list is BLOCK always, you also need to make selections from the following drop-down lists:

•Select Schedule

•QoS Priority

•Bandwidth Profile

•NAT IP (This drop-down list is available only when the WAN mode is NAT. If you select Single Address, the IP address specified should fall under the WAN subnet.)

3.Click Apply to save your changes. The new rule is now added to the Outbound Services table.

Firewall Protection

141