ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

2.Enter the settings as explained in the following table:

Table 20. DMZ IPv6 Config screen settings

Setting

Description

 

 

Start IPv6 Address

Enter the start IP address. This address specifies the first of the contiguous

 

addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is

 

assigned an IP address between this address and the end IP address.

 

 

End IPv6 Address

Enter the end IP address. This address specifies the last of the contiguous

 

addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is

 

assigned an IP address between the start IP address and this IP address.

 

 

Prefix Length

Enter the IPv6 prefix length, for example, 10 or 64.

 

 

3.Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6 Address Pools table on the DMZ Setup (IPv6) screen.

To edit an IPv6 DMZ address pool:

1.On the DMZ Setup screen for IPv6 (see Figure 45 on page 90), click the Edit button in the Action column for the address pool that you want to modify. The DMZ IPv6 Config screen displays.

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more IPv6 DMZ address pools:

1.On the DMZ Setup screen for IPv6 (see Figure 45 on page 90), select the check box to the left of each address pool that you want to delete, or click the Select All table button to select all address pools.

2.Click the Delete table button.

Configure the IPv6 Router Advertisement Daemon and Advertisement Prefixes for the DMZ

Note: If you do not configure stateful DHCPv6 for the DMZ but use stateless DHCPv6, you need to configure the Router Advertisement Deamon (RADVD) and advertisement prefixes.

The RADVD is an application that uses the Neighbor Discovery Protocol (NDP) to collect link-local advertisements of IPv6 addresses and IPv6 prefixes in the DMZ. The RADVD then distributes this information in the DMZ, which allows IPv6 clients to configure their own IPv6 address.

LAN Configuration

93

Page 93
Image 93
NETGEAR FVS318N manual  To edit an IPv6 DMZ address pool,  To delete one or more IPv6 DMZ address pools