NETGEAR FVS318N VPN client advanced authentication settings, 210, Nat-T, Local and Remote ID

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

c.Specify the settings that are explained in the following table.

Table 46. VPN client advanced authentication settings

Setting	Description
Advanced features
Aggressive Mode	Select this check box to enable aggressive mode as the mode of negotiation
	with the wireless VPN firewall.
NAT-T	Select Automatic from the drop-down list to enable the VPN client and
	wireless VPN firewall to negotiate NAT-T.
Local and Remote ID
Local ID	As the type of ID, select DNS from the Local ID drop-down list because you
	specified FQDN in the wireless VPN firewall configuration.
	As the value of the ID, enter remote.com as the local ID for the VPN client.
	Note: The remote ID on the wireless VPN firewall is the local ID on the VPN
	client. It might be less confusing to configure an FQDN such as client.com as
	the remote ID on the wireless VPN firewall and then enter client.com as the
	local ID on the VPN client.
Remote ID	As the type of ID, select DNS from the Remote ID drop-down list because
	you specified an FQDN in the wireless VPN firewall configuration.
	As the value of the ID, enter local.com as the remote ID for the wireless
	VPN firewall.
	Note: The local ID on the wireless VPN firewall is the remote ID on the VPN
	client. It might be less confusing to configure an FQDN such as router.com
	as the local ID on the wireless VPN firewall and then enter router.com as the
	remote ID on the VPN client.

8.Configure the global parameters:

a.Click Global Parameters in the left column of the Configuration Panel screen. The Global Parameters pane displays in the Configuration Panel screen:

Virtual Private Networking Using IPSec and L2TP Connections

210