NETGEAR FVS318N Detailed Status screen information, 361, LAN Port Configuration, WAN Settings on

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

The following table explains the fields of the Detailed Status screen:

Table 88. Detailed Status screen information

Item Description

LAN Port Configuration

The following fields are shown for each of the LAN ports.

VLAN Profile	The name of the VLAN profile that you assigned to this port on the LAN Setup screen
	(see Assign and Manage VLAN Profiles on page 56). If the VLAN is not enabled on
	this port, the default profile (with VLAN ID 1) is assigned automatically.
VLAN ID	The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
	Configure a VLAN Profile on page 59). If the default VLAN profile is used, the VLAN ID
	is 1, which means that all tagged and untagged traffic can pass on this port.
MAC Address	The MAC address for this port. Note the following about the LAN MAC address:
	• All LAN ports that are part of the default VLAN share the same default MAC
	address, unless you have specified that each VLAN needs to be assigned a unique
	MAC address (see Configure VLAN MAC Addresses and LAN Advanced Settings
	on page 64).
	• LAN ports that have an IPv4 address that differs from the default VLAN can still
	share the same MAC address as the default VLAN.
	• LAN port 8 can be assigned as the DMZ port, in which case it has a MAC address
	that differs from the other LAN ports. For information about configuring the DMZ
	port, see Enable and Configure the DMZ Port for IPv4 and IPv6 Traffic on page 85.
IP Address	The IP address for this port. If the port is part of the default VLAN, the IP address is the
	default LAN IP address (192.168.1.1). For information about configuring VLAN
	profiles, see Configure a VLAN Profile on page 59.
Subnet Mask	The subnet mask for this port. If the port is part of the default VLAN, the subnet mask
	is the default LAN IP subnet mask (255.255.255.0). For information about configuring
	VLAN profiles, see Configure a VLAN Profile on page 59.
DHCP Status	The status of the IPv4 DHCP server for the VLAN (Enabled or Disabled). For
	information about enabling DHCP for VLANs, see Configure a VLAN Profile on
	page 59.
WAN Configuration
MAC Address	The default MAC address for the port or the MAC address that you have specified on
	the Broadband Advanced Options screen for the port. For information about
	configuring the MAC address, see Configure Advanced WAN Options and Other Tasks
	on page 50.
IP Address	The IPv4 address and subnet mask of the WAN port. For information about configuring
	the IPv4 address of the WAN port, see Configure the IPv4 Internet Connection and
	WAN Settings on page 26.
IPv6 Address	The IPv6 address of the WAN port. For information about configuring the IPv4 address
	of the WAN port, see Configure the IPv6 Internet Connection and WAN Settings on
	page 37.
WAN State	The WAN state can be either UP or DOWN, depending on whether the port is
	connected to the Internet.

Monitor System Access and Performance

361