ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

After you have configured your account information on the wireless VPN firewall, when your ISP-assigned IP address changes, your wireless VPN firewall automatically contacts your DDNS service provider, logs in to your account, and registers your new IP address.

Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the DDNS service does not work because private addresses are not routed on the Internet.

To configure DDNS:

1.Select Network Configuration > Dynamic DNS. The Dynamic DNS screen displays (see the following figure).

2.Click the submenu tab for your DDNS service provider:

Dynamic DNS for DynDNS.org (which is shown in the following figure)

DNS TZO for TZO.com

DNS Oray for Oray.net

3322 DDNS for 3322.org

Figure 16.

3.Click the Information option arrow in the upper right of a DNS screen for registration information (for example, DynDNS Information).

Figure 17.

IPv4 and IPv6 Internet and Broadband Settings

36

Page 36
Image 36
NETGEAR FVS318N manual  To configure Ddns