NETGEAR FVS318N manual Radvd screen settings for the LAN, Setting Description

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To configure the Router Advertisement Daemon for the LAN:

1.Select Network Configuration > LAN Setup.

2.In the upper right of the screen, select the IPv6 radio button. The LAN Setup screen displays the IPv6 settings (see Figure 38 on page 75.)

3.To the right of the LAN Setup tab, click the RADVD option arrow. The RADVD screen for the LAN displays. (The following figure contains some examples.)

Figure 41.

4.Enter the settings as explained in the following table:

Table 16. RADVD screen settings for the LAN

Setting	Description
RADVD Status	Specify the RADVD status by making a selection from the drop-down list:
	• Enable. The RADVD is enabled, and the RADVD fields become available for you to
	configure.
	• Disable. The RADVD is disabled, and the RADVD fields are masked out. This is the
	default setting.
Advertise Mode	Specify the advertisement mode by making a selection from the drop-down list:
	• Unsolicited Multicast. The wireless VPN firewall advertises unsolicited multicast
	packets at a rate that is specified by the advertisement interval.
	• Unicast only. The wireless VPN firewall responds to unicast packet requests only.
	No unsolicited packets are advertised. Select this option for nonbroadcast multiple
	access (NBMA) links such as ISATAP.

LAN Configuration

81