NETGEAR FVS318N manual DMZ Setup screen settings for IPv4, Setting Description DMZ Port Setup

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 44.

2.Enter the settings as explained in the following table:

Table 18. DMZ Setup screen settings for IPv4

Setting	Description
DMZ Port Setup
Do you want to	Select one of the following radio buttons:
enable DMZ Port?	• Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and
	Subnet Mask fields.
	• No. Allows you to disable the DMZ port after you have configured it.
	IP Address	Enter the IP address of the DMZ port. Make sure that the DMZ
		port IP address and LAN port IP address are in different
		subnets (for example, an address outside the LAN DHCP
		address pool, such as 192.168.1.101 when the LAN DHCP
		pool is 192.168.1.2–192.168.1.100). The default IP address for
		the DMZ port 176.16.2.1.

LAN Configuration

87