NETGEAR FVS318N manual IKE Policies Screen,  To access the IKE Policies screen, 223

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IKE Policies Screen

To access the IKE Policies screen:

Select VPN > IPSec VPN. The IPSec VPN submenu tabs display with the IKE Policies screen in view. In the upper right of the screen, the IPv4 radio button is selected by default. The IKE Policies screen displays the IPv4 settings. (The following figure shows some examples.) To display the IPv6 settings on the IKE Policies screen, select the IPv6 radio button.

Figure 139.

Each policy contains the data that are explained in the following table. These fields are explained in more detail in Table 52 on page 226.

Table 51. IKE Policies screen information for IPv4 and IPv6

Item	Description
Name	The name that identifies the IKE policy. When you use the VPN Wizard to set up a VPN
	policy, an accompanying IKE policy is automatically created with the same name that you
	select for the VPN policy.
	Note: The name is not supplied to the remote VPN endpoint.
Mode	The exchange mode: Main or Aggressive.
Local ID	The IKE/ISAKMP identifier of the wireless VPN firewall. The remote endpoint needs to
	have this value as its remote ID.
Remote ID	The IKE/ISAKMP identifier of the remote endpoint, which needs to have this value as its
	local ID.
Encr	The encryption algorithm that is used for the IKE security association (SA). This setting
	needs to match the setting on the remote endpoint.
Auth	The authentication algorithm that is used for the IKE SA. This setting needs to match the
	setting on the remote endpoint.
DH	The Diffie-Hellman (DH) group that is used when keys are exchanged. This setting needs
	to match the setting on the remote endpoint.

Virtual Private Networking Using IPSec and L2TP Connections

223