ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Unless your selection from the Action drop-down list is BLOCK always, you also need to make a selection from the following drop-down list:

Select Schedule

4.Click Apply. The new rule is now added to the Outbound Services table. The rule is automatically enabled.

Create LAN DMZ Inbound Service Rules

The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is blocked.

IPv4 LAN DMZ Inbound Service Rules

To create a new IPv4 LAN DMZ inbound rule:

1.In the upper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default. The screen displays the IPv4 settings (see Figure 75 on page 153).

Click the Add table button under the Inbound Services table. The Add LAN DMZ Inbound Service screen for IPv4 displays:

Figure 79.

2.Enter the settings as explained in Table 34 on page 135. In addition to selections from the Service, Action, and Log drop-down lists, you need to make selections from the following drop-down lists:

LAN Users

DMZ Users

Firewall Protection

157

Page 157
Image 157
NETGEAR FVS318N manual Create LAN DMZ Inbound Service Rules, IPv4 LAN DMZ Inbound Service Rules, 157