NETGEAR FVS318N manual  To allow or restrict access based on MAC addresses, 121

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

To allow or restrict access based on MAC addresses:

1.On the Wireless Profiles screen (see Figure 56 on page 115), click the ACL button in the ACL column for the wireless profile for which you want to set up access control. The MAC Address Filtering screen displays. (The following figure shows some examples.)

Figure 58.

2.Click Add to open the MAC Address screen (not shown in this manual).

3.Enter a MAC address in the MAC Address field.

4.Click Apply to add the MAC address to the MAC Address table on the MAC Address Filtering screen.

5.Repeat Step 2 through Step 4 for any other MAC address that you want to add to the MAC Address table.

6.From the ACL Policy Status drop-down list, select if access control is enabled, and if so, how the MAC addresses in the MAC Address table are treated:

•Open. Access control is disabled. All MAC addresses, including the ones in the MAC Address table, are allowed access.

•Allow. Only the MAC addresses in the MAC Address table are allowed access. All other MAC addresses are denied access.

•Deny. The MAC addresses in the MAC Address table are denied access. All other MAC addresses are allowed access.

7.Click Apply to save your settings.

Wireless Configuration and Security

121